ARNOLD MCU 400 D Посібник - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник для Контролер ARNOLD MCU 400 D. ARNOLD MCU 400 D 20 сторінок. Mirrorball motorcontroller

Mirrorball Motorcontroller

1. 1-channel Mode

In this mode you can set the DMX starting address and operate the device with a DMX controller.

01) In the main menu, press the SELECT button until the selection arrow appears in the upper line.

02) Press the UP/DOWN buttons until the display shows 1CH:

03) Press the SELECT button to move the selection arrow to the lower line.

04) Press the UP/DOWN buttons to set the DMX starting address. The adjustment range is 001–512.

2. 2-channel Mode

In this mode you can set the DMX starting address and operate the device with a DMX controller.

01) In the main menu, press the SELECT button until the selection arrow appears in the upper line.

02) Press the UP/DOWN buttons until the display shows 2CH:

03) Press the SELECT button to move the selection arrow to the lower line.

04) Press the UP/DOWN buttons to set the DMX starting address. The adjustment range is 001–512.

Ordercode: 60455