3D Hobby Shop ASPERA ARF 46 Manuel d'assemblage - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop ASPERA ARF 46. 3D Hobby Shop ASPERA ARF 46 17 pages. Radio controlled aircraft
11
Install tailwheel assembly as shown by making a hole in the bottom of the rudder, using medium to thick
CA glue to fix the wire to the rudder, and using two wood screws to fix the retainer to the bottom of the
fuselage. Allow the epoxy to cure. If flying off of rough surfaces, also use a 2" piece of strapping tape to
secure tailwheel wire into rudder.
Slide the tailwheel onto the tailwheel wire and use the small wheel collar to retain the wheel.
FUSELAGE FRONT ASSEMBLY
Take THIN CA glue and go over the motor mount and landing gear mount assemblies, as shown. These
are the highest-stress areas of the airframe, and we want to make them as strong as possible.