3D Hobby Shop ASPERA ARF 46 조립 설명서 - 페이지 11

{카테고리_이름} 3D Hobby Shop ASPERA ARF 46에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop ASPERA ARF 46 17 페이지. Radio controlled aircraft

Install tailwheel assembly as shown by making a hole in the bottom of the rudder, using medium to thick

CA glue to fix the wire to the rudder, and using two wood screws to fix the retainer to the bottom of the

fuselage. Allow the epoxy to cure. If flying off of rough surfaces, also use a 2" piece of strapping tape to

secure tailwheel wire into rudder.

Slide the tailwheel onto the tailwheel wire and use the small wheel collar to retain the wheel.

FUSELAGE FRONT ASSEMBLY

Take THIN CA glue and go over the motor mount and landing gear mount assemblies, as shown. These

are the highest-stress areas of the airframe, and we want to make them as strong as possible.