3D Hobby Shop EPP EXTRA 330SC Manuel d'assemblage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop EPP EXTRA 330SC. 3D Hobby Shop EPP EXTRA 330SC 15 pages. Arf rc

Imprimer la page

Install aileron control horns with either medium CA or Welders adhesive. Opening of the slot in the plywood stiffener may

be required to insert the control horn.

Assemble the ailerons onto the wings, flex them up and down to check for free motion, and drip thin CA

glue onto each hinge. Be sure to allow ample time to dry.

Install servo as shown. Due to the variety of servos suitable for the Extra, a small amount of trimming may be required to

fit your choice of servos.