3D Hobby Shop EPP EXTRA 330SC Manuel d'assemblage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop EPP EXTRA 330SC. 3D Hobby Shop EPP EXTRA 330SC 15 pages. Arf rc

Imprimer la page

On to the fuselage, remove the elevator from the horizontal stabilizer. Insert the elevator in the slot for the horizontal

stabilizer. You will find it is easier if the elevator is upside down and backwards as shown.

The elevator can then be turned over once installed in the slot.

Locate the carbon wing spar tube and insert it into the fuselage. The carbon tube is NOT to be glued in, it

is to remain removable. Insert the horizontal stabilizer into the fuselage as shown. Measure from the

tube to the stabilizer on both sides of the fuselage as shown to make sure the stabilizer is straight.

Measure the stabilizer side-to-side to make sure it is centered. Also, look from the rear to be sure the horizontal stabilizer is

parallel with the wing tube.