Cube UP 6000 Series Manuel d'assemblage - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Cube UP 6000 Series. Cube UP 6000 Series 4 pages.

11 step assembly manual for the UP frame

PACKING LIST

Frame

Column

Feet

End rail

Frame 1

Frame 2

Conection rail

Cable clamp

Control box

Handset with cable

Power cable, 3 m

Connecting cable, 1 m

Screws

Hexagon screw for motor house/end rail, M6x14 mm

Screw for feet, M8x14mm

Hexagon screw for motor house/frame, M6x10

Set screws for connection pipe, M6x8mm

Screw for tabletop and handset, Ø5x20mm

HOW TO ASSEMBLE THE DESK

Step 0: Open the box.

Step 2-3: Raise the columns and tighten the screws to the end rail

through the frame. Start with the left column followed by the right

column.

pcs

WARNING Carefully arrange all the cables not to be damaged by tabletop screws.

RESET THE DESK BEFORE USE

Press and hold the "down" button on the handset. Continue pressing

until the desk has reached the lowest position. Press the "down" button

in 5 seconds until the desk enters the reset state, and the handset is

going down to complete the reset. Now the system is operational.

In normal state, the indicator light is off. In the error state, the indicator

light is on. In the reset state, the indicator light flashed.

EXAMPLE OF OVERHANG

Table top L 1200 mm - frame must have a length of 1080 mm

Table top L 1400 mm - frame must have a length of 1280 mm

Table top L 1600 mm - frame must have a length of 1480 mm

Table top L 1800 mm - frame must have a length of 1680 mm

Table top L 2000 mm - frame must have a length of 1800 mm

Place the frame in the center of the table top.

Step 1: Ad both end rails to the frame.

Step 4: Ad 8 M6x10 hexagon screw through the frame into the motor

house of the columns. Tighten the screws.