Cube UP 6000 Series Manuel d'assemblage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Cube UP 6000 Series. Cube UP 6000 Series 4 pages.

Step 5: Ad the feet on to the columns and fasten each with 2 M8x14 mm

screws. Tighten the screws.

Step 8-9: Mount the frame to the table top with 7 5x20 mm wood

screws and the handset with 2 5x20 mm wood screws. Tighten the

screws.

Step 11: Ensure that the cables are placed properly and plug the cables

into the control box. Use the cable clamps to fasten the cables for the

control box.

Step 6-7: Place the frame on the table top. Pull out the frame and make

sure that it is placed 60 mm from the edge, if you have a 1200-1800 mm

table, and 100 mm form the edge if you have a 2000 mm table. Make

sure that the connection rails are centered.

Step 10: Tighten all 8 screws in the frame.

Important

Make sure to tighten all screws,

also after a period of time.