3D Robotics IRIS Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 3D Robotics IRIS. 3D Robotics IRIS 5 pages. Tarot gimbal

Imprimer la page
3
Add the nut to the bolt, and tighten to secure the leg to the arm.
Attach all four tall legs to IRIS.
assembled leg

2 Attach camera

Your Tarot gimbal is compatible with a GoPro HERO3, available from store.3dr.com.
Important note: Make sure that the WiFi on your GoPro is
!
turned OFF at all times when in use with IRIS.
1
Remove the two screws securing the blue face plate.
Remove the plate, and loosen the set screw.
remove
2
Slide camera into housing with the lens nearest
the top-right corner.
loosen
Optional: To remove the short legs, use
the small hex key (1.5 mm) to remove the
screw in the bottom of the leg, and slide
the leg out of the arm.
remove
face plate