Display DT-VMMv2 Manuel d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Display DT-VMMv2. Display DT-VMMv2 20 pages. Projector vertical mirror mount

Imprimer la page
Display DT-VMMv2 Manuel d'installation

ROTATION ADJUSTMENT

If during installation the mount was not quite perpendicular to the screen it is possible to have
some rotation adjustment on the mount (+/- 5 degrees).
1]
Slacken the two locking bolts on the locking plates at the bottom of the projector mount.
2]
Using the adjuster knobs on the top of the mount rotate the adjuster screw pushing it against
the hanging bar. Do this until the desired rotation in achieved.
3]
Tighten the locking bolts on the locking plates at the bottom of the mount ensuring that
the locking plate is tight against the handing bar.
Fig.7. Perpendicular rotation adjustment
16
Vertical Mirror Mount [DT-VMMv2]