Display DT-VMMv2 Посібник з монтажу - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень Display DT-VMMv2. Display DT-VMMv2 20 сторінок. Projector vertical mirror mount

Друкувати сторінку
Display DT-VMMv2 Посібник з монтажу

ROTATION ADJUSTMENT

If during installation the mount was not quite perpendicular to the screen it is possible to have
some rotation adjustment on the mount (+/- 5 degrees).
1]
Slacken the two locking bolts on the locking plates at the bottom of the projector mount.
2]
Using the adjuster knobs on the top of the mount rotate the adjuster screw pushing it against
the hanging bar. Do this until the desired rotation in achieved.
3]
Tighten the locking bolts on the locking plates at the bottom of the mount ensuring that
the locking plate is tight against the handing bar.
Fig.7. Perpendicular rotation adjustment
16
Vertical Mirror Mount [DT-VMMv2]