Aerial WT 230 Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Aerial WT 230. Aerial WT 230 17 pages. Dehumidifier / laundry dryer

Aerial WT 230 Manuel d'instruction
8.3 Laundry dryer with final switch off WT 230-E / WT 250-E
1
2
3
1 – Advice: Close windows and doors!
2 – Advice: Clean filter regularly.
3 – neon yellow: Device has been switched off, because the humidity is below
the adjusted hygrostat value.
4 – Hygrostat (see Pt. 9.3)
5 – Device in defrost mode (see Pt. 11)
6 – neon green: Unit has been switched off.
7 – On-switch
8 – Off-switch
9. Hygrostat
The air dryers of the series AD 2xx / WT 2xx dispose of a hygrostat for setting the
required humidity value. This hygrostat is located in the operation panel of the unit.
The smooth setting option of the hygrostat makes a very convenient humidity
control possible for you. If very precise values are requested, you should match the
hygrostat with the information on a precise hygrometer.
Please consider:
Humidity values of a minimum of 40 % - 45 % r.h. can be achieved with a
condensation dryer. An adsorption dryer is to be employed if lower values are
required.
For this purpose, ask your technical consultant.
Optimal climate:
For living rooms, environmental conditions of 20°-25°C and 50 - 60 % r.h. are
recommended.
For building drying, the hygrostat becomes turned at continues running (POS. I).
In the case of the drying rooms with wood equipment (e.g. floors) or paintings,
antiques and similar things should not be fallen below a humidity of 55%.
Ask your technical consultant in the case of special applications.
6
5
Page 11 of 17
4
7
8