Aerial WT 230 사용 설명서 - 페이지 11

{카테고리_이름} Aerial WT 230에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerial WT 230 17 페이지. Dehumidifier / laundry dryer

8.3 Laundry dryer with final switch off WT 230-E / WT 250-E

1 – Advice: Close windows and doors!

2 – Advice: Clean filter regularly.

3 – neon yellow: Device has been switched off, because the humidity is below

the adjusted hygrostat value.

4 – Hygrostat (see Pt. 9.3)

5 – Device in defrost mode (see Pt. 11)

6 – neon green: Unit has been switched off.

7 – On-switch

8 – Off-switch

9. Hygrostat

The air dryers of the series AD 2xx / WT 2xx dispose of a hygrostat for setting the

required humidity value. This hygrostat is located in the operation panel of the unit.

The smooth setting option of the hygrostat makes a very convenient humidity

control possible for you. If very precise values are requested, you should match the

hygrostat with the information on a precise hygrometer.

Please consider:

Humidity values of a minimum of 40 % - 45 % r.h. can be achieved with a

condensation dryer. An adsorption dryer is to be employed if lower values are

required.

For this purpose, ask your technical consultant.

Optimal climate:

For living rooms, environmental conditions of 20°-25°C and 50 - 60 % r.h. are

recommended.

For building drying, the hygrostat becomes turned at continues running (POS. I).

In the case of the drying rooms with wood equipment (e.g. floors) or paintings,

antiques and similar things should not be fallen below a humidity of 55%.

Ask your technical consultant in the case of special applications.

Page 11 of 17