3D Systems ZPRINTER 250 Manuel de démarrage rapide - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} 3D Systems ZPRINTER 250. 3D Systems ZPRINTER 250 16 pages.
Imprimer la page
2. Check The Printer
Before you start your print job, it's important that you check the
printer. A clean, well-maintained printer produces better
parts, has less downtime, and needs fewer service calls.
Fast
Axis
Parking Caps
(250 Type 1
only)
Build
Bed
Deck
Service
Station
Rails and Carriage
(hidden)
3dscentral.3dsystems.com
Debris Separator
Deck
1.
Check for loose powder in or around the Build Bed, Fast
Axis, and Deck. If you need to clean these areas, follow the
steps in
Section 6.1, "Vacuum Up Excess
2.
Check that the Debris Separator, the Rails and Carriage, the
Service Station and Parking Caps are clean. If any of these
need cleaning, follow the procedures in these sections:
•
Section 6.2, "Empty The Debris Separator"
•
Section 6.3, "Clean The Rails and Carriage"
•
Section 6.4, "Clean The Service Station"
•
Section 6.5, "Clean the Parking Caps (ZPrinter
250 Type 1 only)"
Powder".
5