3D Systems ZPRINTER 250 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 3D Systems ZPRINTER 250. 3D Systems ZPRINTER 250 16 pagina's.

Before you start your print job, it's important that you check the

printer. A clean, well-maintained printer produces better

parts, has less downtime, and needs fewer service calls.

Fast

Axis

Parking Caps

(250 Type 1

only)

Bed

Deck

Service

Station

Rails and Carriage

(hidden)

3dscentral.3dsystems.com

Debris Separator

Deck

Check for loose powder in or around the Build Bed, Fast

Axis, and Deck. If you need to clean these areas, follow the

steps in

Section 6.1, "Vacuum Up Excess

Check that the Debris Separator, the Rails and Carriage, the

Service Station and Parking Caps are clean. If any of these

need cleaning, follow the procedures in these sections:

•

Section 6.2, "Empty The Debris Separator"

•

Section 6.3, "Clean The Rails and Carriage"

•

Section 6.4, "Clean The Service Station"

•

Section 6.5, "Clean the Parking Caps (ZPrinter

250 Type 1 only)"

Powder".