3D Upfitters LulzBot Mini 2 R1 Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3D Upfitters LulzBot Mini 2 R1. 3D Upfitters LulzBot Mini 2 R1 18 pages. Enclosure kit

Imprimer la page

Assemble Panels

The front panels are made from thicker 1/4" acrylic to provide more structural rigidity for the

doors. Do not try to bend the 1/4" acrylic!

1. Identify the Corner Connectors

Each of the corners on the enclosure will be held together by the connectors pictured below. There are

only two versions L and R, which can be identiﬁed by the letters stamped on the inside. The opposite

connectors are identical, i.e. Bottom Right is the same as Top Left. In all cases the surface of the

connector with the cutout pattern faces front or back.

Top Left

Bottom Left

2. Attach The Door Frame Corners 

The front door is designed so that the latches are on the top. Attach the door

connectors on the back side of the door frame using the provided cap head 12mm

screws. See the photos below. The top of the connector should be ﬂush with the top

of the acrylic.

Top Right

Bottom Right