3D Upfitters AnkerMake M5 Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3D Upfitters AnkerMake M5. 3D Upfitters AnkerMake M5 18 pages.

Imprimer la page

You Really Do Want to Read the Directions

Hey, we get it. You just got your new enclosure kit and want to start using it as fast as possible.

How hard can assembling a few plastic panels possibly be? It's not that hard, assuming you're

following the directions, but try to use brute force, and you'll end up working your way through

your vocabulary of swear words. While the acrylic pieces in the kit are strong, they are still

plastic and will break if bent far enough. The ghosts of the broken panels that have gone before

you have become much stronger than you could ever imagine and are whispering into your ear,

"just be a little careful."

Before you Start

Is This Manual for Your Kit?

This installation manual covers the enclosure design for the AnkerMake M5.

Is your Printer Customized?

If your printer is stock, then no customization is needed. If you have customized the printer,

you should examine any modiﬁcations to ensure they don't block the panels. If part of one of

the panels is blocked, you can use a laser or drill to customize one or more panels. This

should be done before removing the plastic or paper covers on the acrylic panels.

Cutting acrylic requires great care as the plastic is prone to crack if mishandled.

Preparing the Printer 

Remove any ﬁlament from the hot end (which will require heating the hot end) and remove the

ﬁlament spool from the spool holder.

Turn the printer oﬀ and unplug the power cable from the printer's power supply.