CAME 319U36EN Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CAME 319U36EN. CAME 319U36EN 19 pages. Control panel for 24v gearmotors

Imprimer la page

Command devices

Stop button ((N.C.) contact.)

- Door stopping button that excludes the automatic closing.To resume movement

press the command button or trasmitter key.

If unused set DIP switch n.9 to ON.

Ket switch selector and/or opening button (N.O. contact)

- Door opening command.

Key-switch selector and/or opening button ( N.O. contact) -

Door opening and closing commands, by pressing the button

or turning the selector key,

or stops depending on what is selected on the Dip-switches

(see selecting functions, Dip-switches 2 and 3). Jumper OFF

(p. 4 point 20) .

Key switch selector and/or opening button (N.O. contact) - Door

closing command.

Jumper ON (p. 4 point 20).

6.1 Electrical connection for photocells functionalities test

(Delta)

With each opening and c

losing command, the card checks the effi ciency of the safety devices

(i.e. photocells). Any anomalies

in the photocell is notiﬁ ed by the ﬂ ashing

LED (PROG) on the control panel, and cancels any other command from the transmitter or button.

Electrical connection to work the photocells safety test:

- the transmitter and receiver, must connected as shown in the diagram:

Set Dip-switch 3 (Four-way Dip-switch) to ON to activate the test.

IMPORTANT:

When you activate the safety test, CHECK that THERE ARE NO JUMPER BRIDGES between contacts 2-C3, 2-C1 and, if the contacts are

unused, exclude them via Dip-switch 8 and 10.

the door inverts its movement

(DIR)