CAME AX3024 Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CAME AX3024. CAME AX3024 16 pages. Operator for swing gates
Également pour CAME AX3024 : Manuel d'installation (16 pages)
Imprimer la page
Weld the gate bracket to the gate leaf making sure the quotas shown in the table are met.
Note: for AX5024 gearmotors, require an additional 10 mm shim between the gate and the bracket.
Note: on non-metal gate leaves assemble and weld the two parts of the bracket and secure them with proper screws. Secure
the tail joint to the bracket.
❶
❷
Insert the bushing (lubricated) into the pillar bracket's hole. The bracket has holes that allow the opening angle to be changed. Secure the tail
joint to the bracket.
Screw M8 x 35
Bushing
Tail joint
Nut UNI 7474 M8
AX3024
Bushing
Tail joint
AX5024