Balt 27666 Manuel d'instructions de montage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Balt 27666. Balt 27666 13 pages.

4.)
Push in two Wood Dowels (D) into the top edge of the Side Panel (P-2) and two Wood
Dowels (D) into the bottom edge of the Side Panel (P-2) as shown in illustration #3.
5.) Screw in two Camposts (C) into the threaded holes
near the back of the Side Panel (P-2). Push in two
Wood Dowels (D) into the predrilled holes next to the
Camposts you just installed. See illustration #3.
6.)
Insert two Cams (F) into the large top predrilled holes
in the Side Panel (P-2). Make sure the arrows on the
Cams are pointed up. Insert two Cams (F) into the
large holes at the bottom of the Side Panel (P-2).
Make sure the arrows on these Cams are pointed
down. See illustration #3.
7.)
Place two Shelf Supports (E) into the center set
of predrilled holes of the Side Panel (P-2).
This will be the right Side Panel assembly.
8.) Repeat Steps 4 through 7 for the second Side Panel (P-2). This will be the
left Side Panel assembly. See illustration #4.
D
P-2
Front
D
Illustration # 4
F
C
E
F
5
D
P-2
F
C
D
E
D
C
F
D
D
D
C
Illustration # 3
Front