Balt 27666 Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Balt 27666. Balt 27666 13 stron.

4.)

Push in two Wood Dowels (D) into the top edge of the Side Panel (P-2) and two Wood

Dowels (D) into the bottom edge of the Side Panel (P-2) as shown in illustration #3.

5.) Screw in two Camposts (C) into the threaded holes

near the back of the Side Panel (P-2). Push in two

Wood Dowels (D) into the predrilled holes next to the

Camposts you just installed. See illustration #3.

6.)

Insert two Cams (F) into the large top predrilled holes

in the Side Panel (P-2). Make sure the arrows on the

Cams are pointed up. Insert two Cams (F) into the

large holes at the bottom of the Side Panel (P-2).

Make sure the arrows on these Cams are pointed

down. See illustration #3.

7.)

Place two Shelf Supports (E) into the center set

of predrilled holes of the Side Panel (P-2).

This will be the right Side Panel assembly.

8.) Repeat Steps 4 through 7 for the second Side Panel (P-2). This will be the

left Side Panel assembly. See illustration #4.

P-2

Front

Illustration # 4

P-2

Illustration # 3

Front