Divine Lighting Hyper 363Z Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Divine Lighting Hyper 363Z. Divine Lighting Hyper 363Z 12 pages.

Imprimer la page

www.divinelighting.com

stored automatically and the screen will stop flashing.

 Mode 2 – Slave Mode: display shows SLAV is the slave mode.

UP/DOWN until display reads SLAV. No need to press Enter.

 Mode 3 – Sound Response Mode: display shows SOUA is the sound activated mode.

Press Menu or UP/DOWN until SOUA. No need to press Enter.

 Mode 4 – Built-in Programs Mode: There are 8 built-in programs indicated by Pr00-

Pr07.

1. First, access built-in mode by pressing Menu or UP/DOWN until the display reads

Pr00 (or Pr01, Pr02, etc.) and press ENTER

2. Press UP / DOWN to select one of the 8 programs and press ENTER.

3. Next adjust the speed of the program. Press ENTER and the first two digits of the

display should be SP. Press UP / DOWN modify the speed of the built-in scenes.

The range is 0-99. Press ENTER to confirm.

4. The first two letters of the display should now show FA. This adjusts how quickly

the fixture will cycle through built-in programs. Modify this using UP / DOWN to

select the desires speed. The range is 0-99. Press ENTER to confirm.

5. The built-in program is now saved for future use.

 Mode 5 - Focus: display shows FOCS. This is the focusing mode

1. Press Menu or UP/DOWN until the display reads FOCS.

2. Press ENTER to set and the display will flash at this moment

3. Press UP / DOWN to change F000-F255, 10°-60°zoom

4. Press ENTER to select and store the current menu options. The mode will

stored automatically and the screen will stop flashing. When repowered, it will display

this state.

 Master/Slave

Master：Units are always set in Master mode (i.e. outputting DMX signal that mirrors

their own operation) unless they are set in DMX or Slave mode. Signal lines longer than 60

meters or 20 fixtures should utilize a signal amplifier.

8. Master/Slave Operation

Press Menu or

Hyper 363Z v1.0