Divine Lighting Hyper 363Z Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Divine Lighting Hyper 363Z. Divine Lighting Hyper 363Z 12 pagina's.
Pagina afdrukkenwww.divinelighting.com
stored automatically and the screen will stop flashing.
Mode 2 – Slave Mode: display shows SLAV is the slave mode.
UP/DOWN until display reads SLAV. No need to press Enter.
Mode 3 – Sound Response Mode: display shows SOUA is the sound activated mode.
Press Menu or UP/DOWN until SOUA. No need to press Enter.
Mode 4 – Built-in Programs Mode: There are 8 built-in programs indicated by Pr00-
Pr07.
1. First, access built-in mode by pressing Menu or UP/DOWN until the display reads
Pr00 (or Pr01, Pr02, etc.) and press ENTER
2. Press UP / DOWN to select one of the 8 programs and press ENTER.
3. Next adjust the speed of the program. Press ENTER and the first two digits of the
display should be SP. Press UP / DOWN modify the speed of the built-in scenes.
The range is 0-99. Press ENTER to confirm.
4. The first two letters of the display should now show FA. This adjusts how quickly
the fixture will cycle through built-in programs. Modify this using UP / DOWN to
select the desires speed. The range is 0-99. Press ENTER to confirm.
5. The built-in program is now saved for future use.
Mode 5 - Focus: display shows FOCS. This is the focusing mode
1. Press Menu or UP/DOWN until the display reads FOCS.
2. Press ENTER to set and the display will flash at this moment
3. Press UP / DOWN to change F000-F255, 10°-60°zoom
4. Press ENTER to select and store the current menu options. The mode will
stored automatically and the screen will stop flashing. When repowered, it will display
this state.
Master/Slave
Master：Units are always set in Master mode (i.e. outputting DMX signal that mirrors
their own operation) unless they are set in DMX or Slave mode. Signal lines longer than 60
meters or 20 fixtures should utilize a signal amplifier.
8. Master/Slave Operation
5
Press Menu or
be
Hyper 363Z v1.0