3DUpFitters CR-10 Smart Enclosure Kit Manuel d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3DUpFitters CR-10 Smart Enclosure Kit. 3DUpFitters CR-10 Smart Enclosure Kit 19 pages.

Imprimer la page

5. Attach Right Side

The right side is a simple, plain sheet of

acrylic. Note there is a hole at the top

for the mid-panel connector.

6. Attach Top

In general you are not going to want to place

anything heavy on top of the enclosure, as

over time it might sag with repeated heating

and cooling cycles. We've used it to hold a

1Kg roll of ﬁlament and that works since it's

close to the side.

The top is tricky to attach because of the large

size of the enclosure. Although attaching it

consists of simply screwing it to existing

connectors, unless you have exceedingly long

arms you may need a buddy to help hold the

nuts in place.

Customers have done everything from having

a child climb into the enclosure to placing the

entire enclosure on the side of a table to access the nuts.