3DUpFitters CR-10 Smart Enclosure Kit Kurulum Kılavuzu - Sayfa 12

3D Yazıcılar 3DUpFitters CR-10 Smart Enclosure Kit için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3DUpFitters CR-10 Smart Enclosure Kit 19 sayfaları.

5. Attach Right Side
The right side is a simple, plain sheet of
acrylic. Note there is a hole at the top
for the mid-panel connector.
6. Attach Top
In general you are not going to want to place
anything heavy on top of the enclosure, as
over time it might sag with repeated heating
and cooling cycles. We've used it to hold a
1Kg roll of filament and that works since it's
close to the side.
The top is tricky to attach because of the large
size of the enclosure. Although attaching it
consists of simply screwing it to existing
connectors, unless you have exceedingly long
arms you may need a buddy to help hold the
nuts in place.
Customers have done everything from having
a child climb into the enclosure to placing the
entire enclosure on the side of a table to access the nuts.
Copyright 2020 3DUpfitters
12