ESI ES2247B Instructions pour l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} ESI ES2247B. ESI ES2247B 20 pages. 2 channel multi-purpose
programmer
Également pour ESI ES2247B : Manuel d'instructions d'installation (16 pages)
Imprimer la page
Basic settings
Setting the Time and Date
The time and date are factory set and changes between
summer and winter time are handled automatically by the unit.
1. Switch the slider to TIME/DATE.
2. The hour symbols will flash, use the +/– buttons to adjust.
3. Press the Next
flash, use the +/– buttons to adjust.
4. Press the Next
use the +/– buttons to adjust the day.
5. Press the Next
use the +/– buttons to adjust the month.
6. Press the Next
use the +/– buttons to adjust the year.
Setting the Backlight
The backlight can either be set permanently ON or OFF.
The programmer backlight is pre-set to be permanently OFF.
When the backlight is permanently OFF, the backlight will turn
ON for 15 seconds when + or – button is pressed, then turn
OFF automatically.
To change seting to permanently ON, move the slider to
TIME/DATE. Press the Next
is displayed. Press + or – to turn backlight ON or OFF. Press
the Next
button or wait for 15 seconds to automatically
confirm and return to Run Mode.
N.B. Do not use Advance or +HR Boost Button to activate the
backlight as it may engage the Advance or +HR facility
and turn on the boiler. Only use the
button and the minute symbols will
button and the day date will flash,
button and the month date will flash,
button and the year date will flash,
button repeatedly until Lit
Home button.
17