ESI ES2247B Petunjuk Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Termostat ESI ES2247B. ESI ES2247B 20 halaman. 2 channel multi-purpose programmer
Juga untuk ESI ES2247B: Panduan Petunjuk Instalasi (16 halaman)

Halaman Cetak

Basic settings

Setting the Time and Date

The time and date are factory set and changes between

summer and winter time are handled automatically by the unit.

1. Switch the slider to TIME/DATE.

2. The hour symbols will flash, use the +/– buttons to adjust.

3. Press the Next

flash, use the +/– buttons to adjust.

4. Press the Next

use the +/– buttons to adjust the day.

5. Press the Next

use the +/– buttons to adjust the month.

6. Press the Next

use the +/– buttons to adjust the year.

Setting the Backlight

The backlight can either be set permanently ON or OFF.

The programmer backlight is pre-set to be permanently OFF.

When the backlight is permanently OFF, the backlight will turn

ON for 15 seconds when + or – button is pressed, then turn

OFF automatically.

To change seting to permanently ON, move the slider to

TIME/DATE. Press the Next

is displayed. Press + or – to turn backlight ON or OFF. Press

the Next

button or wait for 15 seconds to automatically

confirm and return to Run Mode.

N.B. Do not use Advance or +HR Boost Button to activate the

backlight as it may engage the Advance or +HR facility

and turn on the boiler. Only use the

button and the minute symbols will

button and the day date will flash,

button and the month date will flash,

button and the year date will flash,

button repeatedly until Lit

Home button.