ESI ESRTD5 Manuel d'instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} ESI ESRTD5. ESI ESRTD5 12 pages. Digital room thermostat with tpi & delayed start
Également pour ESI ESRTD5 : Instructions pour l'utilisateur (16 pages)

ESI ESRTD5 Manuel d'instructions d'installation

Installing the Room Thermostat

2.6
1. Use a flat headed screwdriver to press the fastener at
the top of the unit, then gently loosen from the unit,
unhooking from top to bottom.
2. Fix the 35mm back box, terminals at the top, onto a
2 flange metal back box with 2 BM3.5x23 screws. If
installing on a 4 flange metal back box, simply push down
the flanges on the top and bottom to leave the flanges
on the left and right hand side.
3. Route the wires through the back of the wall plate.
Fit the wires to the wall-plate in accordance with
the relevant diagram and in accordance with IEE
regulations.
4. Select personal options by referring to DIP switch menu
(See section 2.2.3).
If there are 4 flanges,
push down the top and
bottom flanges to leave
just 1 on either side.
Use a 35mm back box
with 2 screw flanges.
9