ESI ESRTD5 Panduan Petunjuk Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Termostat ESI ESRTD5. ESI ESRTD5 12 halaman. Digital room thermostat with tpi & delayed start
Juga untuk ESI ESRTD5: Petunjuk Pengguna (16 halaman)

Halaman Cetak

Installing the Room Thermostat

2.6

1. Use a flat headed screwdriver to press the fastener at

the top of the unit, then gently loosen from the unit,

unhooking from top to bottom.

2. Fix the 35mm back box, terminals at the top, onto a

2 flange metal back box with 2 BM3.5x23 screws. If

installing on a 4 flange metal back box, simply push down

the flanges on the top and bottom to leave the flanges

on the left and right hand side.

3. Route the wires through the back of the wall plate.

Fit the wires to the wall-plate in accordance with

the relevant diagram and in accordance with IEE

regulations.

4. Select personal options by referring to DIP switch menu

(See section 2.2.3).

If there are 4 flanges,

push down the top and

bottom flanges to leave

just 1 on either side.

Use a 35mm back box

with 2 screw flanges.