ESI SW10K eXperience Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ESI SW10K eXperience. ESI SW10K eXperience 9 pages. Professional reference sub-woofer monitor
Également pour ESI SW10K eXperience : Manuel de l'utilisateur (13 pages)

Imprimer la page

ESI

SW10K eXperience

TRS balanced / unbalanced connection

Connect male side of TRS balanced or

unbalanced cable to the TRS inputs of SW10K

eXperience – as show on the picture on the

right. Make sure the power cable is connected

as well.

Satellite speaker connection

If your source device has its own base management, you would typically connect the satellite

speakers directly to them rather than to SW10K eXperience. This is the standard procedure if you

connect SW10K eXperience and your satellites to any surround capable amplifier with separate

outputs. Refer to the following diagram for a 2.1 setup:

In a 5.1 or a 7.1 setup, the other surround speakers will also be connected to the source directly

although the diagram does not show that. If your source device is only stereo and / or does not have

its own base management, the satellites are connected to the outputs on the right side of the back

panel of SW10K eXperience using balanced XLR cables. Refer to the following diagram: