ESI SW10K eXperience 사용자 설명서 - 페이지 5
{카테고리_이름} ESI SW10K eXperience에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI SW10K eXperience 9 페이지. Professional reference sub-woofer monitor
ESI SW10K eXperience에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)
페이지 인쇄
ESI
SW10K eXperience
TRS balanced / unbalanced connection
Connect male side of TRS balanced or
unbalanced cable to the TRS inputs of SW10K
eXperience – as show on the picture on the
right. Make sure the power cable is connected
as well.
Satellite speaker connection
If your source device has its own base management, you would typically connect the satellite
speakers directly to them rather than to SW10K eXperience. This is the standard procedure if you
connect SW10K eXperience and your satellites to any surround capable amplifier with separate
outputs. Refer to the following diagram for a 2.1 setup:
In a 5.1 or a 7.1 setup, the other surround speakers will also be connected to the source directly
although the diagram does not show that. If your source device is only stereo and / or does not have
its own base management, the satellites are connected to the outputs on the right side of the back
panel of SW10K eXperience using balanced XLR cables. Refer to the following diagram:
5