ClearOne CONNECT AVB Manuel de démarrage rapide - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} ClearOne CONNECT AVB. ClearOne CONNECT AVB 16 pages. Network audio bridge for converge pro & sr products

Imprimer la page
6.
Verify units have been upgraded by checking the firmware version on the
front panel.
Reconnect all E-bus cables, if needed, to complete the stack of units.

Upgrading from CONVERGE Pro 2.X firmware

1.
Remove any 1.X, 3.X and 4.X units from the stack by disconnecting the
expansion bus link cable from the 2.X units.
2.
Re-connect to the 2.X stack with CONVERGE Console.
3.
Download the 4.X firmware file to the stack of units.
4.
The units will default and reboot after the download of 4.X firmware. The 2.X
to 4.X upgrade requires the firmware to be loaded twice to complete the
version upgrade.
5.
Units are fully upgraded.
6.
Verify units have been upgraded by checking the firmware version on the
l.
front pane
Reconnect all E-bus cables, if needed, to complete the stack of units.

Upgrading from CONVERGE Pro 1.X firmware

1.
Remove any 2.X, 3.X and 4.X units from the stack by disconnecting the
expansion bus link cable from the 1.X units.
2.
Re-connect to the 1.X stack with CONVERGE Console.
3.
Download the 4.X firmware file to the stack of units.
4.
The units will default and reboot after the download of 4.X firmware. The 1.X
to 4.X upgrade requires the firmware to be loaded twice to complete the
version upgrade.
QUICK-START GUIDE
13