ClearOne CONNECT AVB 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} ClearOne CONNECT AVB에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne CONNECT AVB 16 페이지. Network audio bridge for converge pro & sr products
페이지 인쇄6.
Verify units have been upgraded by checking the firmware version on the
front panel.
Reconnect all E-bus cables, if needed, to complete the stack of units.
Upgrading from CONVERGE Pro 2.X firmware
1.
Remove any 1.X, 3.X and 4.X units from the stack by disconnecting the
expansion bus link cable from the 2.X units.
2.
Re-connect to the 2.X stack with CONVERGE Console.
3.
Download the 4.X firmware file to the stack of units.
4.
The units will default and reboot after the download of 4.X firmware. The 2.X
to 4.X upgrade requires the firmware to be loaded twice to complete the
version upgrade.
5.
Units are fully upgraded.
6.
Verify units have been upgraded by checking the firmware version on the
l.
front pane
Reconnect all E-bus cables, if needed, to complete the stack of units.
Upgrading from CONVERGE Pro 1.X firmware
1.
Remove any 2.X, 3.X and 4.X units from the stack by disconnecting the
expansion bus link cable from the 1.X units.
2.
Re-connect to the 1.X stack with CONVERGE Console.
3.
Download the 4.X firmware file to the stack of units.
4.
The units will default and reboot after the download of 4.X firmware. The 1.X
to 4.X upgrade requires the firmware to be loaded twice to complete the
version upgrade.
QUICK-START GUIDE
13