1 BY ONE H005 Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 1 BY ONE H005. 1 BY ONE H005 14 pages. Belt drive turntable system

Imprimer la page

7. Using your hands, slowly rotate the platter ten times in a clockwise

direction as shown by the arrow below.

Cartridge Replacement

1. Before replacement, put the stylus protector back on the stylus to prevent damage

to the stylus during the replacement process.

2. Carefully remove the wire leads from the original cartridge.

3. Loosen the two screws on the headshell that are securing the cartridge and then

remove the original cartridge.

4. Mount the new cartridge to the headshell and tighten it lightly. Do not completely

tighten the screws at this moment.

5. Connect the wire leads to the new cartridge's terminals .The wire lead color codes

are as below:

Wire

Channel

White

Left channel positive (L+)

Black

Left channel negative (L–)

Red

Right channel positive (R+)

Black

Right channel negative (R-)

6. Adjust the cartridge's position to make sure it is precisely aligned on the headshell

so that the stylus will be tracking the grooves in parallel perfectly.

To achieve this, place the included paper

the turntable spindle, carefully lift the tone arm and place the tip of the stylus on the

points marked 130mm and 250mm respectively. Fine tune the cartridge's position

on the headshell until the cartridge is perfectly in parallel with the reference lines at

both points.

7. Tighten the screws completely once the perfect alignment is achieved.

NOTE: If you are unfamiliar or uncomfortable with completing this procedure, we

recommend consulting with a professional to perform the installation.

cartridge alignment protractor over

When the Turntable is Moved

Using the product's original packing materials, wrap the turntable in the reverse order

from when you unwrapped it. If you do not have the packaging materials, take the

following measures:

• After disconnecting the AC adapter from the outlet, remove the felt mat and platter,

and then wrap them so that they do not get damaged.

• Attach the protector to the cartridge.

• Use a string or something similar to tie the tonearm to the rest so that it does not

become dislodged.

• Wrap the turntable body with paper or a soft cloth so that it does not get damaged.

Technical Specifications

Turntable

Model

1-AD07US01,H005

Nominal Speeds

33 1/3 & 45RPM

Effective Tonearm Length 8.6" (218.5mm)

Tracking Force Range

3.0-6.0g

Outboard Power Supply

12V/ 500mA AC-DC

AC Power Adapter

Input: 100-240V 50/60Hz, Max. 200mA

Dimensions (W x H x D)

16.34" x 10.2" x 4.44" (415 x 340 x 148mm)

Weight

13.67lbs (6.2kg)

Cartridge

Stylus Model

Frequency Response

Recommended Load Resistance

Channel Balance

Amplifier Connection

Channel Separation

Recommended Tracking Force

Output Voltage

Weight

Speed Variance

±1.5%

Wow and Flutter

≤0.15%

Signal to Noise

55dB

Overhang

0.73in

Power Consumption 5W

Audio Technica AT-3600L

20Hz-20kHz

47kohms

＜ 2.5dB

MM - input

＞ 18dB

3.5±0.5g

2.5mV