1 BY ONE H005 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Gramofon 1 BY ONE H005. 1 BY ONE H005 14 stron. Belt drive turntable system

7. Using your hands, slowly rotate the platter ten times in a clockwise
direction as shown by the arrow below.

Cartridge Replacement

1. Before replacement, put the stylus protector back on the stylus to prevent damage
to the stylus during the replacement process.
2. Carefully remove the wire leads from the original cartridge.
3. Loosen the two screws on the headshell that are securing the cartridge and then
remove the original cartridge.
4. Mount the new cartridge to the headshell and tighten it lightly. Do not completely
tighten the screws at this moment.
5. Connect the wire leads to the new cartridge's terminals .The wire lead color codes
are as below:
Wire
Channel
White
Left channel positive (L+)
Black
Left channel negative (L–)
Red
Right channel positive (R+)
Black
Right channel negative (R-)
6. Adjust the cartridge's position to make sure it is precisely aligned on the headshell
so that the stylus will be tracking the grooves in parallel perfectly.
To achieve this, place the included paper
the turntable spindle, carefully lift the tone arm and place the tip of the stylus on the
points marked 130mm and 250mm respectively. Fine tune the cartridge's position
on the headshell until the cartridge is perfectly in parallel with the reference lines at
both points.
7. Tighten the screws completely once the perfect alignment is achieved.
NOTE: If you are unfamiliar or uncomfortable with completing this procedure, we
recommend consulting with a professional to perform the installation.
cartridge alignment protractor over
18

When the Turntable is Moved

Using the product's original packing materials, wrap the turntable in the reverse order
from when you unwrapped it. If you do not have the packaging materials, take the
following measures:
• After disconnecting the AC adapter from the outlet, remove the felt mat and platter,
and then wrap them so that they do not get damaged.
• Attach the protector to the cartridge.
• Use a string or something similar to tie the tonearm to the rest so that it does not
become dislodged.
• Wrap the turntable body with paper or a soft cloth so that it does not get damaged.

Technical Specifications

Turntable
Model
1-AD07US01,H005
Nominal Speeds
33 1/3 & 45RPM
Effective Tonearm Length 8.6" (218.5mm)
Tracking Force Range
3.0-6.0g
Outboard Power Supply
12V/ 500mA AC-DC
AC Power Adapter
Input: 100-240V 50/60Hz, Max. 200mA
Dimensions (W x H x D)
16.34" x 10.2" x 4.44" (415 x 340 x 148mm)
Weight
13.67lbs (6.2kg)
Cartridge
Stylus Model
Frequency Response
Recommended Load Resistance
Channel Balance
Amplifier Connection
Channel Separation
Recommended Tracking Force
Output Voltage
Weight
Speed Variance
±1.5%
Wow and Flutter
≤0.15%
Signal to Noise
55dB
Overhang
0.73in
Power Consumption 5W
Audio Technica AT-3600L
20Hz-20kHz
47kohms
< 2.5dB
MM - input
> 18dB
3.5±0.5g
2.5mV
5g
19