Alton ECOMAX ELG03 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Alton ECOMAX ELG03. Alton ECOMAX ELG03 14 pages. 18v cordless string trimmer

Imprimer la page

7. STOP THE MACHINE

Release the switch button 2 in Figure 6.

8. OPERATION TIPS

WARNING! Keep clearance between the body and the machine.

Do these tips when you use the machine:

Keep the machine connected to the correctly worn harness

Keep a ﬁrm hold with the two hands on the machine while you

operate the machine

Cut tall grass from the top down

If grass winds around the trimmer head:

Remove the battery pack

Remove the grass

9. LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-oﬀ blade (Figure 7)on the guard. The

line cut oﬀ blade continuously trims the line to ensure a consistent and

eﬃcient cut diameter. Advance line whenever you hear the engine running

faster than normal, or when trimming eﬃciency diminishes. This will maintain

best performance and keep line long enough to advance properly.

( Figure 7 )

10. CUTTING TIPS

Tilt the machine toward the area to be cut. Use the tip of the cutting line to

cut grass, as shown in ﬁgure 9

Move the machine from right to left to prevent thrown debris toward the

operator

Do not cut in the dangerous area

Do not force the trimmer head into uncut grass

Wire and picket fences cause cutting line wear and breakage. Stone and

brick walls, curbs, and wood can wear the cutting line quickly

The cutting Angle of the cutting head can be adjusted according to the

actual cutting requirements. The cutting Angle can be adjusted from 0-

22.5-45-67.5-90, as shown in ﬁgure 9

90°

67.5°

45°

22.5°

0°

Press this

button ﬁrst

( Figure 8 )

11. TRIMMER EDGES

WARNING! Risk of injury! When using e cutting head upright, particular

care should be taken. Always maintain suﬃcient distance to the cutting

head.

NOTE: Risk of damage to the unit! Avoid contact with solid surfaces to

prevent rapid wear of the thread.

NOTE: The heel assembly only serves for easier guidance when trimming

edges. It should not be used for brush cutting and no inﬂuence on the

cutting height.

Remove the battery pack from the lawn trimmer.

Press the work head rotation button in the ﬁgure 10. Rotate to 0°.

Press the work head rotation button in the Figure 10, Rotate the Aluminum

tube 90°.

Once the adjustment is complete, as shown in Figure 11 you can edge

trimming.

Direction

Of Rotation

Danger

Area

Best Cutting Area

( Figure 9 )