ClearSpan PB00566R4 Manuel d'instruction - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ClearSpan PB00566R4. ClearSpan PB00566R4 18 pages. Freestanding “hut” style model 14' wide x 14' high x 36' long

Imprimer la page

Section E - Install Main Cover

Step 1: Fasten a ratchet to the end rafter with a Tek screw in the bottom hole of the ratchet. The

ratchet should be as low as possible and still operable. Repeat this step in all four corners.

Step 2: On the side of the shelter, identify the rafters where you will install side ratchets. These

locations are at the second, the next to the last, and every other rafter in between.

Step 3: Fasten ratchets to the outsides of these rafters using a Tek screw about 2" from the bottom

of the rafters. Ratchets are located on the same rafters on both sides of the shelter. Repeat the

previous steps so you have ratchets on both sides of the shelter opposite each other.

Page 14