ClearSpan PB00566R4 사용 설명서 - 페이지 14

{카테고리_이름} ClearSpan PB00566R4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan PB00566R4 18 페이지. Freestanding “hut” style model 14' wide x 14' high x 36' long

페이지 인쇄

Section E - Install Main Cover

Step 1: Fasten a ratchet to the end rafter with a Tek screw in the bottom hole of the ratchet. The

ratchet should be as low as possible and still operable. Repeat this step in all four corners.

Step 2: On the side of the shelter, identify the rafters where you will install side ratchets. These

locations are at the second, the next to the last, and every other rafter in between.

Step 3: Fasten ratchets to the outsides of these rafters using a Tek screw about 2" from the bottom

of the rafters. Ratchets are located on the same rafters on both sides of the shelter. Repeat the

previous steps so you have ratchets on both sides of the shelter opposite each other.

Page 14