ClearView PowerBoards PB-TA-006 Manuel d'instructions d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} ClearView PowerBoards PB-TA-006. ClearView PowerBoards PB-TA-006 18 pages. Toyota landcruiser 300 series 2022-current

Imprimer la page

Fitting Instructions

Step 5

Installing running board

5.1 Open vehicle door to deploy the motor bracket. Use M6 bolts and M6 spring washers

provided, mount running board to bracket.

Do not tighten bolts fully, as you may need to adjust the position of the running board.

5.2 Open and close vehicle door to check position of power board.

Adjust position of idler and motor bracket, as well as running board if necessary and

tighten all bolts (M6 & M8 bolts) once position is finalised.

5.3 In some cases, the 'U shape' packing washers may need to be placed in between

bracket assembly and vehicle bracket mounting points to correctly position Clearview

Power Boards.

In these cases, M8 bolts used to hold top bracket to vehicle will need to be loosened

to insert washer.

5.4 Once running board is correctly positioned, tighten all bolts in the board.

Cycle the board 2-3 times to allow idler/motor bracket to settle.

Secure idler motor brackets and check alignment.

clearviewaccessories.com.au