ClearView PowerBoards PB-TA-006 Manuel d'instructions d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} ClearView PowerBoards PB-TA-006. ClearView PowerBoards PB-TA-006 18 pages. Toyota landcruiser 300 series 2022-current

Imprimer la page

Operation of Clearview Power Boards

Normal Operation: Clearview Power Boards will deploy automatically when vehicle door is

opened and retract when door is closed.

Manual Operation: On occasions you may want the Clearview Power Boards to be deployed

even when vehicle door is closed to access vehicle roof. To do this, open vehicle door first so

Clearview Power Boards are deployed. Step your foot on the running board and close your

vehicle door at the same time, the Clearview Power Board should remain deployed. To reset,

open and close your vehicle door again.

Reset Clearview Power Boards: Clearview Power Boards are equipped with a safety cut off

feature in the case where normal operation is obstructed. To resume operation, simply clear

the obstruction, open and close vehicle door. Although Clearview Power Boards are

equipped with the safety cut off feature, we strongly advise to keep hands and feet away

from moving components when Power Boards are in operation.

Maintenance: Over time, debris such as mud, dirt and salt may build up on moving

components of Power Boards, leading to unwanted noise and reduced performance. If this

occurs, manually deploy the Power Boards, and remove debris. Silicone lubricant spray may

also be applied to hinges.

clearviewaccessories.com.au