Edic ENDEAVOR Manuels rapides - Page 4
Parcourez en ligne ou téléchargez le pdf Manuels rapides pour {nom_de_la_catégorie} Edic ENDEAVOR. Edic ENDEAVOR 15 pages. Multi-purpose extractor
Également pour Edic ENDEAVOR : Manuel du propriétaire/de l'opérateur (17 pages)
ENDEAVOR 9000I-HSH CONTROL PANEL
1. POWER SWITCH TO VACUUM MOTOR.
2. POWER SWITCH TO PUMP MOTOR.
3. POWER SWITCH TO HEATER. LIGHT INDICATES HEAT ELEMENT IS ON.
4. SWITCH CONTROLS AUTO DUMP PUMP. LIGHT CONFIRMS POWER.
5. POWER PRIME/PRESSURE RELIEF VALVE. SET TO "P" TO RELIEVE
PRESSURE OR PRIME THE PUMP. DO NOT LEAVE UNATTENDED IN THE "P"
POSITION.
6. CIRCUIT LOCATOR. THE GREEN LIGHT WILL TURN ON WHEN THE TWO
POWER CORDS ARE CONNECTED TO TWO SEPARATE CIRCUITS.
7. PRESSURE GAUGE USED TO MONITOR PRESSURE. DO NOT EXCEED 1100PSI.
8. QUICK DISCONNECT FOR SOLUTION LINE. CONNECTS TO OPTIONAL 990RS
CHEMICAL FEED SYSTEM.
9. PRESSURE REGULATOR. TURN CLOCKWISE TO INCREASE PRESSURE AND
COUNTER-CLOCKWISE TO REDUCE PRESURE. DO NOT EXCEED 1100PSI
10. VACUUM HOSE CONNECTOR. CONNECT YOUR 1.5" VACUUM HOSE TO THIS
BARB.