Edic ENDEAVOR 빠른 매뉴얼 - 페이지 4

{카테고리_이름} Edic ENDEAVOR에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Edic ENDEAVOR 15 페이지. Multi-purpose extractor
Edic ENDEAVOR에 대해서도 마찬가지입니다: 소유자/운영자 매뉴얼 (17 페이지)

페이지 인쇄

ENDEAVOR 9000I-HSH CONTROL PANEL

1. POWER SWITCH TO VACUUM MOTOR.

2. POWER SWITCH TO PUMP MOTOR.

3. POWER SWITCH TO HEATER. LIGHT INDICATES HEAT ELEMENT IS ON.

4. SWITCH CONTROLS AUTO DUMP PUMP. LIGHT CONFIRMS POWER.

5. POWER PRIME/PRESSURE RELIEF VALVE. SET TO "P" TO RELIEVE

PRESSURE OR PRIME THE PUMP. DO NOT LEAVE UNATTENDED IN THE "P"

POSITION.

6. CIRCUIT LOCATOR. THE GREEN LIGHT WILL TURN ON WHEN THE TWO

POWER CORDS ARE CONNECTED TO TWO SEPARATE CIRCUITS.

7. PRESSURE GAUGE USED TO MONITOR PRESSURE. DO NOT EXCEED 1100PSI.

8. QUICK DISCONNECT FOR SOLUTION LINE. CONNECTS TO OPTIONAL 990RS

CHEMICAL FEED SYSTEM.

9. PRESSURE REGULATOR. TURN CLOCKWISE TO INCREASE PRESSURE AND

COUNTER-CLOCKWISE TO REDUCE PRESURE. DO NOT EXCEED 1100PSI

10. VACUUM HOSE CONNECTOR. CONNECT YOUR 1.5" VACUUM HOSE TO THIS

BARB.