Edic ENDEAVOR 빠른 매뉴얼 - 페이지 6

{카테고리_이름} Edic ENDEAVOR에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Edic ENDEAVOR 15 페이지. Multi-purpose extractor
Edic ENDEAVOR에 대해서도 마찬가지입니다: 소유자/운영자 매뉴얼 (17 페이지)

페이지 인쇄

GFCI FUNCTION:

Each power cord is equipped with a GFCI (Ground Fault Circuit Interruptor) box. The GFCI is

designed to trip and cut off power in the event of an unsafe electrical condition. Any time the

power cord is plugged in or unplugged, you must reset the GFCI box by pressing the red button

on the GFCI box.

CIRCUIT LOCATOR:

The ENDEAVOR has a built in circuit locator that is designed to detect the availability of two circuits. Do not

connect both of the power cords to the same wall outlet. If the green light on the front panel (marked CT) turns

on, then you are on two separate circuits. If it fails to turn on, you must locate another outlet on another circuit

until it comes on. Although the ENDEAVOR's functions may operate normally, do not ignore the circuit

locator as doing so may overload a single circuit and blow the wall breaker.