- ページ 6

超音波ジュエリークリーナー Edic ENDEAVORのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Edic ENDEAVOR 15 ページ。 Multi-purpose extractor
Edic ENDEAVOR にも：オーナーズ／オペレーターズ・マニュアル (17 ページ)

ページを印刷する

GFCI FUNCTION:

Each power cord is equipped with a GFCI (Ground Fault Circuit Interruptor) box. The GFCI is

designed to trip and cut off power in the event of an unsafe electrical condition. Any time the

power cord is plugged in or unplugged, you must reset the GFCI box by pressing the red button

on the GFCI box.

CIRCUIT LOCATOR:

The ENDEAVOR has a built in circuit locator that is designed to detect the availability of two circuits. Do not

connect both of the power cords to the same wall outlet. If the green light on the front panel (marked CT) turns

on, then you are on two separate circuits. If it fails to turn on, you must locate another outlet on another circuit

until it comes on. Although the ENDEAVOR's functions may operate normally, do not ignore the circuit

locator as doing so may overload a single circuit and blow the wall breaker.