AKKTOL BT-607 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AKKTOL BT-607. AKKTOL BT-607 14 pages. Rivet nut tool

Before riveting any rivnut smaller than M8 or 5/6-18, you need to calculate the

working/compression stroke by using the chart and formula. Taking the M5 rivet

nut working on a 2 mm thick workpiece, for example, the calculation is as follows:

The working stroke = 13.1 mm (L) - 1.0 (k) - 8.0 mm (h) - 2.0 mm (e) = 2.1 mm

1. Open the handles and screw the rivet nut onto the mandrel clockwise

until it is completely on.

2. Pre-drill a hole in the workpiece, if needed, according to the size of

the rivet nut, and insert the rivet nut into the hole.

3. Close the handles to deform the rivet nut in the hole.