AKKTOL BT-607 Kullanıcı Kılavuzu - Sayfa 10

Araçlar AKKTOL BT-607 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AKKTOL BT-607 14 sayfaları. Rivet nut tool

Before riveting any rivnut smaller than M8 or 5/6-18, you need to calculate the

working/compression stroke by using the chart and formula. Taking the M5 rivet

nut working on a 2 mm thick workpiece, for example, the calculation is as follows:

The working stroke = 13.1 mm (L) - 1.0 (k) - 8.0 mm (h) - 2.0 mm (e) = 2.1 mm

1. Open the handles and screw the rivet nut onto the mandrel clockwise

until it is completely on.

2. Pre-drill a hole in the workpiece, if needed, according to the size of

the rivet nut, and insert the rivet nut into the hole.

3. Close the handles to deform the rivet nut in the hole.