dji 3WWDSZ-10016 Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} dji 3WWDSZ-10016. dji 3WWDSZ-10016 12 pages.

first-time use.

1. Place the battery into the Charging Hub, connect the charger to the Charging Hub, and then

connect the charger to a power outlet (100 - 240V, 50/60Hz).

2. The Charging Hub will intelligently charge batteries in sequence according to battery power levels

from high to low.

3. The Status LED blinks green when charging and turns solid green when fully charged. The buzzer

will begin beeping when charging is complete. Remove the battery or turn off the buzzer to stop it.

Adjusting the Antennas

Tilt the display device on the remote controller to the desired position, then adjust the antennas so

they are facingoutward. The strength of the remote controller signal will fluctuate depending on the

position of the antennas.

Unfold

Stron

Week

Try to keep the aircraft inside the optimal transmission range. If the signal is weak, adjust the

antennas or fly theaircraft closer.