dji 3WWDSZ-10016 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} dji 3WWDSZ-10016에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji 3WWDSZ-10016 12 페이지.

first-time use.

1. Place the battery into the Charging Hub, connect the charger to the Charging Hub, and then

connect the charger to a power outlet (100 - 240V, 50/60Hz).

2. The Charging Hub will intelligently charge batteries in sequence according to battery power levels

from high to low.

3. The Status LED blinks green when charging and turns solid green when fully charged. The buzzer

will begin beeping when charging is complete. Remove the battery or turn off the buzzer to stop it.

Adjusting the Antennas

Tilt the display device on the remote controller to the desired position, then adjust the antennas so

they are facingoutward. The strength of the remote controller signal will fluctuate depending on the

position of the antennas.

Unfold

Stron

Week

Try to keep the aircraft inside the optimal transmission range. If the signal is weak, adjust the

antennas or fly theaircraft closer.