ARTHUR HOLM AH12D1HGA Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARTHUR HOLM AH12D1HGA. ARTHUR HOLM AH12D1HGA 14 pages. Hdcp compliant motorised monitors for furniture integration

Imprimer la page

1. Input Connectors

INPUT CONNECTORS

DVI 1/ DVI A:

DVI-I input signal. Connect a DVI (digital) input signal and

select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to

connect an ARGB (analogue) input signal and select DVI A on the OSD

monitor menu.

DVI 2:

DVI-D input signal. Connect a DVI (digital) input signal and select

DVI 2 on the OSD monitor menu.

- Use high quality DVI cables with 2 m maximum length.

12V D.C.:

Power supply input connector. XLR-4 connector.

- 1,2: Ground

- 3,4: 12Vdc

GPI:

Monitor external contact close control. SubD9 female.

1 . GPI1 +

2. GPI1 –

3. GPI2 +

4. GPI2 –

5. GPI3 –

6. GPI3 +

7. N.C.

8. +12Vdc (600mA max.)

9. Ground:

- Use GPI1 (1:12Vdc, 2: Ground) to open the monitor

- Use GPI2 (3:12Vdc, 4: Ground) to move the monitor to the memorised

position

- Use GPI3 (6:12Vdc, 5: Ground) to close the monitor

INPUT CONNECTORS

Termination:

Activate (ON) the termination ONLY, on the last unit of the

RS422 bus.

AHnet:

RJ45 CAT5 connector for addressable RS422 control. There is a loop

through connector to use as signal RS422 output. Up to 30 monitors can be

connected on the same RS422 bus.

USB:

USB connectors for mouse, keyboard, touch screen and webcam.

These connectors are active depending of the monitor model.

On the RS422 connectors, connect RS422 signals only. Be careful

not to connect Network cables or PoE signals, it will severely

damage the monitor.