ARTHUR HOLM AH12D1HGA 사용자 설명서 - 페이지 7
{카테고리_이름} ARTHUR HOLM AH12D1HGA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM AH12D1HGA 14 페이지. Hdcp compliant motorised monitors for furniture integration
페이지 인쇄INPUT CONNECTORS
DVI 1/ DVI A:
DVI-I input signal. Connect a DVI (digital) input signal and
select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to
connect an ARGB (analogue) input signal and select DVI A on the OSD
monitor menu.
DVI 2:
DVI-D input signal. Connect a DVI (digital) input signal and select
DVI 2 on the OSD monitor menu.
- Use high quality DVI cables with 2 m maximum length.
12V D.C.:
Power supply input connector. XLR-4 connector.
- 1,2: Ground
- 3,4: 12Vdc
GPI:
Monitor external contact close control. SubD9 female.
1 . GPI1 +
2. GPI1 –
3. GPI2 +
4. GPI2 –
5. GPI3 –
6. GPI3 +
7. N.C.
8. +12Vdc (600mA max.)
9. Ground:
- Use GPI1 (1:12Vdc, 2: Ground) to open the monitor
- Use GPI2 (3:12Vdc, 4: Ground) to move the monitor to the memorised
position
- Use GPI3 (6:12Vdc, 5: Ground) to close the monitor
12
INPUT CONNECTORS
Termination:
Activate (ON) the termination ONLY, on the last unit of the
RS422 bus.
AHnet:
RJ45 CAT5 connector for addressable RS422 control. There is a loop
through connector to use as signal RS422 output. Up to 30 monitors can be
connected on the same RS422 bus.
USB:
USB connectors for mouse, keyboard, touch screen and webcam.
These connectors are active depending of the monitor model.
On the RS422 connectors, connect RS422 signals only. Be careful
not to connect Network cables or PoE signals, it will severely
damage the monitor.
13