ARTHUR HOLM DynamicTabLift Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARTHUR HOLM DynamicTabLift. ARTHUR HOLM DynamicTabLift 20 pages.
Imprimer la page
SAFETY INSTRUCTIONS
Wiring connected to hazardous voltage requires installation by
qualified personnel or the use of ready-made flexible cables.
For your security, your equipment must be connected to an
electrical outlet with grounding connection protection.
Since the plug is used to disconnect the device, the operating
electrical outlet must be in an easily accessible place.
Environment
• Install the equipment on an elevated, flat surface.
• Install the equipment in a ventilated area.
• Avoid exposing the equipment to:
∙
Rain or water
∙
Excessive heat, cold or humidity
∙
Area exposed to direct sunlight
∙
Dirty areas
∙
Equipment generating strong magnetic fields
• Avoid placing open containers of liquid, near the equipment.
• Keep a minimum distance of 30 mm in order to have good ventilation.
• Never place above the device any sources of flames such as lighted
candles, etc.
• If you are using the device in extreme weather conditions and/or
tropical climates, the equipment should be installed in a room which
ensures a reasonable level of temperature and humidity.
• To prevent damage the equipment must be firmly anchored to the
surface, as shown on the installation instructions.
6